Track-type container gantry crane
It-is-applied in out side warehouse or railway sideways to conduct
common lifting and loading unload works.
It consists of four main parts, for bridge structure the traveling
mechanism, the-trolley and the electric equipment.
The bridge is welded structure of boxed-type girder, individual
drives are adopted for traveling mechanism on each end beam of the
All movements of the crane are controlled in the cabin, either
rigid shapes of steel (angles or tees) or flexible insulated cable
shall be selected to be utilized as runway conductors and proposed
in the order by the purchaser.
Max and Min value of environment temperature, the short of power
supply, the voltage and the other data shall accord to the buyer’s
Weight overload protection device, Top quality long time bearing
polyurethane materials buffer, Crane traveling limit switch,
Voltage lower protection function, Emergency stop system, current
overload protection system and so on!
Cabin or remote control or pendent line with press button or both
Design and construction rules:
All the standards which is required for the crane is the Chinese
Primer and finishing paint
Color: according to your demand.
Average thickness: about 100 microns
The crane we produced is designed to meet the requirement stated in
your specification, as well as for the operation conditions. The
sub-assemblies used by are standardized equipment of renowned
manufactures and have been approved for specific crane operation by
our test laboratory. Their characteristics regarding impact,
vibrations, wear and safety were examined, a continuous high
quality standard is ensured by series production and standardized
The electrical equipment is accommodated in robust steel plate
All movement can be switched off by actuating the emergency-off
switch at the control station via a main contactor. The entire
equipment is easy to install and dismantle due to the use of
threaded bolts and top-hat rails. Cable inlet from the cable gland
.Power supply cable and control cable along the girder.
A protective earth conductor is fitted as standard, a crane switch
Travel end switches, long and cross travel limited y means of
preliminary and final limited switches and overload protection: In
the event of overload, the hoist unit switches off and only the
lowering motion is possible.
Load und unload of goods
Crab travelling speed
Trolley travelling speed
Max. wheel load
Steel track recommmended
3-Phase A.c.50HZ 380V